Sign, sign everywhere a sign

With apologies to Bill Engvall and The Five Man Electrical Band, this entry is all about signs--the hanging variety used at trade shows.

The NACS show was a great example of companies using hanging structures as a part of their dimensional marketing strategy. Many use them as signposts so that visitors looking for them can find their booth from across the hall. Others use them as an extension of the booth itself--whether that be a physical extension of the structure or a graphical look that ties to the booth.

They can also be used to convey a message--verbal or visual. Perhaps it's the logo of the company, an extension of the booth message or look, or perhaps it's a symbol from a related or overarching campaign. Any and all of these approaches are justified when it comes to the highest signage in (or above) your space.

If you have an iconic product, then you have a real advantage. Heinz Ketchup and Goetze's Candies are examples of those who hung signs representative of their product. You have to be careful with scale (the size of sign in relation to the booth and the height limit), or your sign could get lost in the air. Keep in mind that at some shows the height limit can vary by the type of sign you have or from where it originates.

Hanging signs versus signs supported by the booth structure may be subject to different height limits. In most cases, height limits are measured to the top of the sign and are either at 16, 20, or 24 feet from the floor.

But above all (pun intended), keep the integrity of your icon--the same rules that apply to it in print or as a 3-D logo in the booth at eye level are to be enforced. Be sure the colors are true to the PMS colors specified for other uses. That can be tough when ink or dye colors change or look different under different types of light or from when they are applied to fabric or surfaces of sign material. Ask your vendor as they should have the experience to advise you of the challenges of the translation.

We'll discuss this again in a future entry with more examples.

Lesson learned: variety is the spice of trade show life in the hall.

TTSG

Hanging a sign

They look so great and graceful (well, mostly) hanging in the air over the show floor. But somebody had to get hanging signs up there. Usually, it's up to you to get the job done.

Hanging your completed sign has a few steps:

• Put in the order for the riggers well in advance of the show.
• Assemble the sign.
• Spot the location above the booth where the sign is to hang.
• Attach the aircraft cables
• Hoist the sign.
• Make sure it is turned the way you want it.

Obviously, this is all done in cooperation with your rigging contractor. By putting the order in well in advance, you take advantage of any discounts. When you arrive at the show, check in at the service desk and, if you can predict it, let them know when you'll be ready for the riggers to come.

A typical rigging team is made up of two or three men: one on the ground and two in the basket (either on a forklift or a gooseneck crane, depending on the height of the sign.

Most promoters either have the sign at 20 or 24 feet to the top of the sign.

In most halls (like here in Chicago), the riggers open and assemble the sign. In some non-union environments, you or your I&D team can assemble the sign and wait for the riggers.

Spotting the location above the booth. Do this with the lead rigger. At NACS, they had the coolest laser device. We found the center of the booth and pointed the laser from that spot to the ceiling. This confirmed the location (a particular beam) where the sign will be hung from.

Part of assembly is to attach the cables. These aircraft-rated cables and attachments are usually specified by the hall or the city, so follow the lead of the riggers.

The cables are rated by size and the weight they can bear. The cables provided by the sign maker usually work, but in some cities (LA comes to mind), sometimes a heavier-rated cable has to be substituted.

There are several attach points (either 3 or 4 points on the top of the sign) from which the sign hangs. The number and location help the sign hang straight.

Make sure, as they are hoisting it, be sure the logo faces the correct direction (in this case the front of the hall). This signpost will help draw attendees and targeted visitors to your booth at the show.


Lesson learned: Again, plan and come prepared and your task will come off on time, within budget and look the part you've asked it to play.

TTSG

Hanging signs

At some time in our career we all have to deal with the hanging sign. It is what you can see across the hall that draws your prospects and suspects (and maybe clients/customers) to your booth. They can see you "across the crowded room" without having to know or search for your booth number.

Hanging signs can take a number of shapes and sizes, but most are fabric-over-aluminum framed (otherwise known as Moss-type signs--after the most popular manufacturer) units. They can be hanging banners, pinwheel shaped, cylindrical (round) or square. They can be lit, motorized (so they turn); they can be hung from light trusses or straight from the ceiling. Professional riggers (usually a crew of two in most cities) must be hired to assemble and install hanging signs from aircraft cables using a crane (equipped with a basket) and proper tools.

Be sure that the design is complimentary to the graphic and structural look of your exhibit and is sized (neither too large or too small) for the space it hangs above.

Three rules to remember:
1. Usually only island booths are allowed to have hanging signs above them (20x20 and larger).
2. Typically they are hung at 16, 20 or 24 feet (to the top of the sign).
3. Don't forget to file your approval of the sign with your organizer and place the order for riggers (to install it) with your general contractor.

TTSG

(thanks to Gary Donatell, Freeman Decorating St Paul, for providing the example show rules to me)